Categories
Cosmetic Dentistry Teeth Whitening

Best in-office teeth whitening system in Melbourne | Sapphire Teeth Whitening

A bright, healthy smile boosts confidence and is aesthetically pleasing to others. While there are many bleaching treatments on the market, it can be difficult to know which one to choose. The Sapphire Whitening System is available as an in-office treatment and take-home treatment. It has proven to whiten teeth by up to 7 shades in 30 minutes.

The creators of the Professional Sapphire Whitening System have engineered a unique mix of active ingredients to ensure that sensitivity is minimized while teeth whitening effects are maximized. In addition to whitening components, the Sapphire gel also contains minerals and fluoride, allowing teeth to remain healthy and strong.

The in-office and take-home Sapphire Professional treatments both remove stains easily. Examples of reversible stains include:

  • Yellowing caused by ageing
  • Tobacco stains
  • Stains caused by pigmented foods and drinks (like red wine)

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

The Sapphire professional chairside treatment

Before the teeth can be bleached, surface plaque, debris, and calculus need to be removed by way of prophylaxis (teeth cleaning). If signs of gum inflammation and decay are present, these will need to be managed by the dentist before the Sapphire whitening gel is applied. Usually, the dentist will photograph the teeth prior to applying the bleaching gel, so before-and-after comparisons can be made.

The Sapphire Professional Chairside treatment contains 25% hydrogen peroxide. The whitening gel is applied to the teeth for either 30 minutes or 60 minutes, depending on the severity of staining. Though results vary for each patient, Sapphire whitening gel lightens teeth by approximately 7 shades in 30 minutes and 12 shades in 60 minutes. Sapphire Whitening is chemically activated, so no heat, lasers or lamps are required.

 

 

What makes Sapphire Teeth Whitening unique compared with other In-Office Teeth Whitening system? 

Also known as LUMIBRITE In-office whitening, Sapphire teeth whitening is unique, and is ideal for patients who prefer a more holistic approach because this treatment does not include the use of UV light to activate whitening agents. The creators of the Professional Sapphire Whitening System have engineered a unique mix of active ingredients to ensure that sensitivity is minimized while teeth whitening effects are maximized. In addition to whitening components, the Sapphire gel also contains minerals and fluoride, allowing teeth to remain healthy and strong. Also included in the whitening gel is a desensitizing agent, which decreases the risk of sensitive teeth following the whitening procedure. If you have sensitive teeth, or just want as painless a process as possible, the Sapphire Teeth Whitening System is right for you. Sapphire is much easier on teeth than other in-office treatments.

The Sapphire System stands out as a remarkably fast and effective teeth whitening solution. It has proven to whiten teeth by up to 7 shades in 30 minutes.

The Sapphire professional chairside treatment

 

Before the teeth can be bleached, surface plaque, debris, and calculus need to be removed by way of prophylaxis (teeth cleaning). If signs of gum inflammation and decay are present, these will need to be managed by the dentist before the Sapphire whitening gel is applied. Usually, the dentist will photograph the teeth prior to applying the bleaching gel, so before-and-after comparisons can be made.

The Sapphire Professional Chairside treatment contains 25% hydrogen peroxide. The whitening gel is applied to the teeth for either 30 minutes or 60 minutes, depending on the severity of staining. Though results vary for each patient, Sapphire whitening gel lightens teeth by approximately 7 shades in 30 minutes and 12 shades in 60 minutes. Sapphire Whitening is chemically activated, so no heat, lasers or lamps are required.

What should I expect from my Sapphire Teeth Whitening Procedure?

Sapphire Teeth Whitening is a fast and simple procedure and should take no more than 30 minutes to an hour. Your dentist will perform a preliminary dental exam, to make sure that the treatment will be beneficial for you. You will be given protective eye gear to wear, to shield your eyes during the procedure. Your gums will also be protected, to prevent exposure to the bleaching gel and plasma light. During the treatment, you can continue to relax by taking a nap, watching TV, or listening to music.

Unlike other whitening treatments that only use bleaching chemicals, Sapphire Whitening is able to produce brighter results in a shorter amount of time by combining light therapy with advanced chemistry. The brightening effect is amplified when the Plasma Arc Light is applied to the whitening gel, which triggers a chemical reaction that lightens the tooth almost immediately.

Discomfort after the procedure is usually minimal or nonexistent, though some patients may experience enhanced tooth sensitivity to the cold. These temporary symptoms should last between 1 to 3 days and can be relieved by over the counter medication. Though Sapphire Whitening is overwhelmingly safe for the vast majority of patients, it is not recommended for pregnant or breastfeeding women, children younger than 13 years of age, and patients taking light sensitive medication. Results can be maintained by following proper dental hygiene and brushing occasionally with Sapphire take-home whitening gel.

How long does Sapphire In-Office Whitening take?

The complete teeth whitening procedure takes just over an hour. The teeth whitening begins with a preparation period followed by 45 minutes of whitening. A cleaning is recommended prior to the actual Sapphire Teeth Whitening session.

The Sapphire Whitening Process

 

Treatment begins by protecting the lips and gums, leaving only the teeth exposed. A hydrogen peroxide-based gel is then applied. The Sapphire procedure uses a light bleaching unit that has been designed to filter out infrared emissions. This feature helps to ensure that the teeth being treated don’t become over-heated, which is important for your comfort. The whitener is usually applied to the teeth in two 30-minute applications. Upper and lower teeth are treated at the same time, and the total time including pre- and post-treatment is somewhere around 90 minutes.

Are there any side effects to Sapphire teeth whitening?

With teeth whitening some people experience temporary increased tooth sensitivity to cold during treatment. These symptoms disappear within 1-3 days after completion of the teeth whitening treatment.

 

Is Sapphire Teeth Whitening Safe?

Yes, extensive research and clinical studies indicate that whitening teeth under the supervision of a dentist is safe. In fact, many dentists consider teeth whitening the safest cosmetic dental procedure available. As with any teeth whitening product, Sapphire Teeth Whitening is not recommended for children under 13 years of age and pregnant or lactating women.

 

How long do the results last?

By following some simple post teeth whitening care instructions, your teeth will always be lighter than they were before. To keep your teeth looking their best, we recommend flossing, brushing twice daily, and occasional touch-ups with Sapphire take-home gel. These are professional formula products designed specifically to keep your teeth their brightest. They are available through our office.

 

Check our Sapphire laser Teeth Whitening specials below

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

Sapphire Teeth Whitening System Review

The Sapphire Whitening system is made by Den-Mat – they are the same makers as Lumineers. The system used to be called the Rembrandt Sapphire In-Office Whitening System but was renamed when Den-Mat sold the Rembrandt line to Oral-B. This system uses a very powerful Sapphire Plasma Arc Light along with a professional-grade teeth whitening gel.

Feeling insecure with your smiles?  Call Vogue Smiles Melbourne 9629-7664, for all your Cosmetic Dentistry and Teeth Whitening treatment in Melbourne

 

Categories
Cosmetic Dentistry Teeth Whitening

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

 

LumiBrite In-Office Whitening System is a revolutionary tooth whitening procedure. It’s safe effective and very fast. In just under an hour, your teeth will be dramatically whiter.  Whitening is ideal for anyone looking for immediate results. The convenience of LumiBrite in comparison to days of wearing trays and gradual whitening makes it the perfect choice for the busy patient.

The LumiBrite light-activated gel was developed after years of research by DenMat, the leaders in professional take-home tooth whitening. The gel is a scientifically formulated, pH balanced Hydrogen Peroxide that, when activated by the LumiBrite light, gently penetrates the teeth to remove deep stains and discolouration. With proper care and an occasional touch-up at home, your whiter smile will sparkle for years.

Other whitening systems don’t compare to the LumiBrite Chairside Whitening System. Nothing whitens better or faster.

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

LumiBrite is the new generation of Chairside Whitening with Laser

The LUMIBRITE whitening system is a safe, gentle, and effective way to whiten teeth and achieve that bright, healthy smile you’ve always wanted. Using state-of-the-art, bleach-free whitening technology, the LUMIBRITE system eliminates the tooth sensitivity that can accompany other forms of teeth whitening products. You’ll be able to show off your pearly-whites in no time!

How does the LUMIBRITE whitening system work?

LUMIBRITE is a revolutionary teeth whitening system that combines the powerful effects of the Sapphire® Supreme Plasma Arc Curing Light, along with professional-grade teeth whitening gel. The combination of light and gel work together to give you a whiter, more stunning smile in less time than other forms of teeth whitening.

 

How is LUMIBRITE different from other forms of whitening?
  • Pain-free, zero-sensitivity whitening
  • Beautiful, white smiles in fewer than 30 minutes of treatment time
  • No lengthy isolation or potentially dangerous UV rays
  • Long-lasting results up to six months
  • The professional procedure not available over-the-counter or in a mall
FYI The Lumibrite™ teeth whitening system

The Lumibrite™ system is Den-mat Corporation’s professional-level whitening product. (Den-mat has a long and active history in the field of cosmetic dentistry.)

What type of whitener is used?

This system utilizes a hydrogen peroxide-based bleaching gel that has a 35% hydrogen peroxide concentration and a pH around 6.

Different than any other professional system we reviewed, Lumibrite™ protocol includes the application of desensitizer before each application of the whitener. This helps to minimize the potential for post-bleaching tooth sensitivity.

 

Other light unit characteristics

The Lumibrite system used plasma arc laser light unit (the Sapphire™ Supreme PAC). The Sapphire™ Supreme PAC unit has been designed so it filters out infrared emissions, which helps to ensure that the teeth being treated don’t become over-heated. The wavelength of the light emitted from this unit is in the blue-green range.

It is also capable of illuminating all of the patient’s teeth (both upper and lower) simultaneously. This helps to make performing the procedure more efficient for the dentist.

 

LUMIBRITE® has many advantages over these other treatments, including:
  • All teeth treated simultaneously.
  • Faster treatment times.
  • Longer lasting results.
  • Reduced sensitivity.
  • Safe procedure and treatment.
  • No harmful UV rays.
  • Treatments are performed by an experienced professional.

 

How long do treatments take?

From start to finish, Sapphire™ treatments usually take on the order of 90 minutes or so.

The whitener is typically applied to the patient’s teeth for a total duration of one hour (two applications, 30 minutes each). Both the upper and lower teeth are treated simultaneously. Including all of the activities that need to be performed before and after treatment, the total amount of time usually rounds up to about 90 minutes.

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

How is the LUMIBRITE® treatment performed?

Prior to treatment, there will be a consultation where the dentist will outline the exact procedure.  On treatment day, a deep cleaning (prophylaxis) will be performed to rid the teeth of any debris and plaque.

Here is a brief overview of the LUMIBRITE® procedure:

  1. Cheek retractors will be placed to expose the entire surface of the teeth.
  2. The gums will be painted or covered to reduce sensitivity.
  3. The teeth will be painted with desensitizing gel to virtually eliminate sensitivity.
  4. The dentist will apply the whitening gel to the teeth.
  5. The Sapphire light will then be applied to activate the gel.  This specialized LUMIBRITE® light can be positioned to work on all the teeth simultaneously.
  6. After 30 minutes, the gel will be removed from the teeth and the mouth will be rinsed.
  7. More gel will be applied for another 30 minutes.
  8. Again, the gel will be removed and the mouth will be thoroughly cleansed.
Are at-home follow-up treatments recommended?

The protocol for the LumiBrite™ system recommends that a patient should continue on with at-home treatments after their in-office bleaching session has been performed. They recommend the use of their LumiBrite™ Home Whitening Gel product.

 

LumiBrite Chairside Whitening System versus Zoom In-Chair Teeth Whitening

What is the difference between laser teeth whitening versus ZOOM teeth whitening?

What is the Difference between laser teeth whitening versus ZOOM teeth whitening?

The Zoom!™ whitening system uses a 25% hydrogen peroxide-based whitener.

Zoom!™ whitening gel has been formulated for use with a bleaching light.

Discus’ latest unit is their WhiteSpeed LED bleaching lamp (LED = light-emitting diode). Historically, Zoom!™ lamps were designed to produced output in the 350-400nm range (violet light). According to Discus an important aspect of the new WhiteSpeed unit is that it emits some ultraviolet light too

This focus on UV output is different than any other bleaching system we reviewed. In fact, many light units are specifically designed to filter out UV light.

 

Is light really needed?

A manufacturer’s recommendation about the use of a bleaching light is ultimately based on their claims that it activates a catalyst within the whitener, which in turn can help to increase its effectiveness.

In the past, the validity of this type of claim has not been universally accepted by the dental community as a whole. However, Zoom!™ studies suggest that its latest generation whitener does contain a component that once activated by ultraviolet light does assist the bleaching process, thus making the use of the Zoom!™ light unit an aid. This is the only system we encountered that made mention of ultraviolet-light activation.

 

Light unit characteristics.

Zoom!™ bleaching lights are designed so they are able to illuminate all of the patient’s teeth (both upper and lower) at once. This feature makes performing treatments less labour intense for the dentist, which may ultimately help to reduce your whitening costs.

Some bleaching lights have a relatively narrow beamwidth. That means a staff member must stay with the patient and continually move the light unit around so every tooth is given proper exposure.

 

Other features.

The Zoom!™ bleaching lights filter out infrared emissions. This is important because doing so helps to minimize the amount of heat that the patient’s teeth are subjected to during their treatment.

 

How long do treatments take?

Treatments with the Zoom!™ system usually take about 60 minutes, from start to finish.

Each bleaching session is broken down into three individual applications of the whitener, with each application being left on the teeth for 15 minutes (45 minutes total exposure). However, with pre- and post-treatment activities included, the total treatment time will probably take up towards 60 minutes.

Zoom!™ protocol allows for a fourth 15-minute application if the dentist feels it’s needed.

The whitening procedure.

Zoom™ treatments involve those same basic steps used with any in-office whitening system.

Note: The Zoom!™ system does include “activation” of the whitening gel with a bleaching light, post-treatment application of a desensitizer, and continued treatments with an at-home whitener.

Feeling insecure with your smiles?  Call Vogue Smiles Melbourne 9629-7664, for all your Cosmetic Dentistry and Teeth Whitening treatment in Melbourne

 

Categories
Cosmetic Dentistry Dental Health Maintenance Dental Veneers Editor's Pick

Tips for Caring for Your Porcelain Dental Veneers

You’ve finally made the decision to revamp your smile with porcelain veneers- congratulations! Now you can venture out into the world with a beautiful, straight smile. However, your work isn’t done after you’ve had your veneers put into place, and there are several steps you’ll need to take to keep them safe. By taking a proactive approach to caring for your veneers, you can get the most out of your stunning new smile.

Because veneer treatment is an investment into your smile, there is a good reason to want to maximize your results. This means prolonging the life of your veneers with proper care.

Below are tips for Caring of Your Porcelain Dental Veneers

 

Don’t Chew on Inedible Items

 

Do you have a bad habit of chewing on pens, or are you a nail biter? Not only are these habits gross and a social faux pas, but they can also actually lead to damage of your porcelain veneers over time. To protect your cosmetic dental work, make an effort to keep inedible items out of your mouth.

Do not bite into very hard objects. Everybody knows the teeth are not just used for eating, but they can also be used as tools for, say, opening bottles. Unfortunately, such activity is harmful not just for your teeth, but also for your veneers. Very hard objects, such as metal caps and glass bottles can chip the porcelain. If you have the habit of biting into random things, such as pencils, pens, or even ice, it would be helpful if you can take steps to end the mannerism.

Caring of Your Porcelain Dental Veneers

Keep them Clean

You must care for your veneers just as much as you care for your real teeth. Brushing at least twice a day and using dental floss are great ways to maintain optimal dental health. Poor hygiene can also lead to gum diseases, which may cause your gums to recede, exposing the borders of veneers and putting them at risk of chipping or detachment.

Use the right toothpaste

Use the right toothpaste. Some toothpaste brands may contain ingredients that are too abrasive for both your teeth and your veneers. When choosing your toothpaste, make sure to check the ingredients for substances like hydrogen peroxide and sodium bicarbonate or baking soda. The former will eat away at your veneers’ surface while the latter’s gritty nature can lead to the veneers losing their colour and sheen. In general, it may be wiser to choose gel products over those in paste form as they tend to contain none of the ingredients mentioned. Do not feel compelled to buy whitening toothpastes either, as they are not necessary and may even be detrimental to your veneers.

Get your Veneers regularly polished

Cosmetic dentists can help to preserve the life of your dental work by polishing your veneers. This procedure can be performed approximately once every three months. A dentist will use specialized solutions and equipment to ensure that your veneers and original teeth are thoroughly cleaned. However, polishing your veneers doesn’t mean that you can slack on your own dental hygiene. Flossing and brushing your teeth frequently can allow you to enjoy longer results after polishing, and you can go long periods of time between each session.

 

Watch what you eat 

The rule against biting hard stuff also applies to food, such as raw carrots, raw apples, hard chips, and meat cuts that contain bone. Aside from watching out for tough food items, you must also be wary of eating too much, especially those that contain lots of sugar and acid. These items contribute to tooth decay which cannot be good for your veneers either. That said, be sure to avoid sweet and starchy foods, such as candies, kinds of pasta, bread, and crackers, as well as sugary drinks like carbonated soda and fruit juice. Acidic items like fruits (lemons and other kinds of citrus) are also best prevented from staying too long inside your mouth. Finally, avoid food that contains lots of colouring. Veneers do get stained, just not very easily.

Avoid substances that may cause stains

Porcelain veneers are designed to be stain resistant, but that fact isn’t the same for your natural tooth structure. In order to keep your smile looking at its whitest, you should be wary of substances that might stain your veneers, including cigarettes, coffee, soda, red wine, tea, berries, and beets. If you do enjoy one of these items, be sure to brush and floss your teeth immediately afterwards to minimize the likelihood that stains will develop.

Protect your Teeth when playing sports

Do you play sports or other contact activity in which the health of your teeth might be at risk? If so, you will want to wear a mouth guard or other form of protection to ensure that your veneers are safe. Basketball, football, wrestling, and other contact sports may put your beautiful new smile in danger. By protecting your teeth from potential trauma, you are saving yourself a lot of pain, not to mention the cost that would be required to repair your smile.

Quit Grinding

Many people suffer from tooth grinding, whether they realize it or not. Tooth grinding, otherwise known as bruxism, is a serious issue involving the clenching and shifting of the teeth during sleep. If you continue to grind your teeth without seeking treatment, you can damage your porcelain veneers. Damage may also occur to your original teeth and the jaw joint, so if you suspect that you are a nighttime grinder, consult with your dentist about treatment options. He or she may fit you for a nighttime mouth guard that can help to protect your teeth from the damaging effects of grinding.

Avoid Too much Alcohol 

Consuming lots of alcoholic drinks will soften the bonding composites holding the veneers to your teeth. While this doesn’t mean the veneers will come loose, it will make the bonding line more prone to damage, deterioration, and stains. Alcohol is not found just in beverages though. When buying mouthwash or toothpaste, check the ingredient list to see if they contain alcohol as these can be just as damaging as liquor.

Choose your toothbrush

Brushing your teeth does wonder for your teeth’s health and your veneers’ longevity, but only if you use the right toothbrush. Pick one that’s not too hard as it will scratch the surface of your veneers. Settle instead for a toothbrush that has soft bristles.

Keep in mind that veneers, like everything else, do not last forever. You will have to replace them after a definite period. Your dentist can give you recommendations on when you will need to get your replacement veneers, or if you need a different solution.

If you want to improve the quality and the appearance of your smile, there is very little doubt on the effectiveness of veneers. However, in order to obtain and maximize the benefits they offer, it takes more than just being able to afford them, you also have to know how to maintain them.

Floss at least once a Day

It is recommended that you floss daily to keep the edges of the veneers clean in between your teeth. Regular waxed nylon floss is an effective cleaner, but it may be a bit difficult to slide between tight contacts of your teeth because of the thick wax. Nylon that has no wax can floss easily but is prone to shredding. The best flossing material is polytetrafluoroethylene (PTFE) floss. This type of floss uses the same material that is used in the high-tech Gore-Tex fabric. It slides easily between your teeth, and it’s less likely to shred. Also, proper technique is also very important when it comes to flossing. Don’t just slide the floss up and down. This does not clean the sides also known as proximal properly. Place your dental floss between your teeth and gently slide it on the sides of your teeth. Now wrap the floss on one tooth forming a C-shape and slide your floss up and down being sure that you scrap the sides properly. Do this up to under the gums where the plaque is not easily visible. Now without removing the floss from the tooth, slide it over to the adjacent tooth and repeat the same process.

Bottom Line

Now that you’ve learnt how to provide care to your veneers, it’s time to put your newfound knowledge to test. If you follow the tips provided above, your transition should be easy. With just some minor adjustments to your daily oral hygiene routine, you can provide your dental veneers with the necessary care they need. With just some little help from your dentist, your dental veneers should last up to 15 years.

For expert Dental advice on caring of your Porcelain Veneer, Call Vogue Smiles Melbourne on 9629-7664

 

Categories
Cosmetic Dentistry Dental Veneers

Comprehensive know-hows on Dental Veneer Procedure | All you need to know

Most people who visit a dentist go to improve their smile. Cosmetic dentistry is a growing field, and more and more people are now taking interest in looking good and making their smiles more aesthetic.

There are several procedures that can help in this regard, and porcelain veneers seem to be one of the most popular ones. Porcelain veneers are a type of treatment that can correct a number of things including:

  • Misaligned teeth
  • Crooked teeth
  • Yellow teeth
  • Chipped teeth

Porcelain is actually a very thin material which can be made to resemble the colour of natural teeth. This is why it is heavily used in dentistry. Moreover, porcelain veneers are durable and can last for a long time if you take proper care of them.

A bad smile ruin can ruin your confidence and self-esteem. Porcelain veneers can help you re-build that confidence and show off those pearly whites.

 

The Porcelain Veneer procedure

What to Expect with Veneer Procedures

Now that you understand the basics of dental veneers, you should also learn about the procedure. Typically, your veneers are installed in 2-4 dental visits. These visits are likely to be spaced out over a period of six weeks but may take less time depending on the dentist and number of veneers. Below are the step by step process on what to expect on your treatment.

Step 1: Taking the Shade

Your dentist will use their shade guide to determine which colour of porcelain most closely matches the teeth that lie to each side of the tooth they’re veneering.

They may decide that different colours need to be used for different portions of the veneer. They’ll also make notes about which regions of the laminate need to be comparatively more or less translucent.

Step 2: Trimming the tooth- 0.5 mm with Traditional Veneer

a) With this procedure, the idea is that the enamel on the front side of your tooth is trimmed back about the same thickness as the veneer that will be placed. That way its overall thickness is not dramatically changed.

The ideal situation is one where all surfaces of the veneer only rest on tooth enamel. For the most part, a dentist will try to limit the depth of the trimming to just the tooth’s enamel layer. That way, all aspects of the veneer’s internal surface will be bonded directly onto the enamel. (The type of tooth structure with which the most secure and predictable bond can be made.)

The precise amount of tooth enamel that’s shaved off will vary with each case but it can be as little as .5 to .7 millimetres. That’s about twice the thickness of an eggshell and when compared to most other dental procedures it’s a very small amount.

While performing the trimming, your dentist will keep in mind some recognized guidelines as to the maximum amount of enamel that ideally can be removed, and try to stay within those limits.

b) If your tooth has some areas of decay, your dentist will trim more extensively in those locations so to remove it.

c) At least, in theory, porcelain veneers can be bonded over existing white (dental composite) fillings. However, replacing them with new ones helps to ensure the most secure bond possible.

d) The outline form of the preparation will be given a shape where the edges of the veneer (where it meets your tooth) aren’t easily seen or lie at a point where opposing teeth make contact.

 

Trimming more.

In some cases, the dentist may decide to trim the tooth more, possibly on the order of 1.5 mm or so (about a 1/16th of an inch).

There are two issues at hand when this decision is made.

  • More aggressive tooth preparation means that a thicker veneer can be placed. One that can both mask over the color of the tooth underneath yet still retain a high degree of restoration translucency (a characteristic that helps to create a very natural-looking appearance).
  • On the other hand, excessive preparation may expose regions of tooth dentin (the hard tooth tissue under the enamel). If so, restoration longevity may be affected.

 

Will anaesthetic be needed?

It can be possible to prepare teeth for veneers without the use of an anaesthetic (a dental “shot”). But you may find that you want it.

Some teeth and tooth tissues are naturally sensitive to cold sensations (like those created by the dentist’s suction device or the water spray from their drill). And if the veneer’s edges will extend below the gum line, those tissues will need to be manipulated and may be sensitive.

Step 3: Taking the impressions

Once the trimming has been completed, your dentist will take an impression of your tooth and its surrounding teeth and gums. It’s this copy of your mouth that will be used to fabricate your veneer.

This impression is then sent to a dental laboratory and they will use it to make your porcelain veneer. Depending on what arrangements have been made, the turn-around time for this process is usually about 2 weeks.

Step 4: Placing a temporary Veneer if needed

In those cases where your veneer will be fabricated by a dental laboratory, you will usually have to wait 1 or 2 weeks while it is being made. The question then becomes whether or not you will wear a temporary veneer during this time period.

 

A) Situations where no temporary is placed.

This can be the plan for cases where just a minimal amount of tooth structure has been removed (like in our picture above). Admittedly, on close inspection, your tooth will look a little strange. But just how much of an issue this is is something that you’ll have to decide.

Since a surface layer of your tooth has been trimmed off, you may notice that it has an increased sensitivity to hot and cold foods and beverages. You can also expect that it will feel a little rough to your tongue and lips.

B) Situations where a temporary is used.

It’s more common to place a temporary veneer when treating cases where there’s been a need to trim a relatively greater amount of tooth structure.

These are teeth whose appearance would be noticeably strange, or where the issue of thermal sensitivity might be a problem for the patient.

If having a temporary placed is important to you, and your dentist has not yet discussed this issue with you, you absolutely need to ask about it when your appointment is initially scheduled.

A dentist frequently uses a mould that’s filled will plastic and then slipped over your teeth to form the temporary. In some cases, this mould is made from a wax/plaster mock-up of your teeth that due to the time involved in making it must be arranged for in advance of your appointment.

A temporary veneer needs to be secure enough that it stays in place well but is also easy to remove at your next appointment. Keep in mind that unlike a temporary dental crown that entirely encases its tooth, this type is just anchored on the front side. And this difference can make creating a successful temporary a bit of a challenge.

Dentists have solutions for these challenges but they usually come at the expense of creating some degree of gum inflammation (because you can’t floss and clean around the temporary veneer thoroughly). Inflamed gum tissue can be harder to manage when a veneer is cemented, primarily because it bleeds easily.

If you decide that no temporary is needed, your dentist doesn’t have to be concerned about it coming off, or being able to get it off. And during your cementation appointment, it’s more likely that they’ll have healthy gum tissue to work with. And that’s a very positive thing for the outcome of your case.

Temporary veneers aren’t usually cemented, they’re just held in place by the way their plastic has set and locked in place on and in between your teeth.

Getting them off is easy enough. Your dentist will just use their drill and trim the temporary in half, then tease its parts off.

Step 5: The Pre-Cementation evaluation

At this point, your porcelain veneer has been fabricated and is ready to be bonded onto its tooth. If a temporary veneer has been placed, your dentist will remove it.

 

A) Checking the fit.

Your dentist will first need to evaluate how your veneer seats on your tooth.

To do so, they’ll set it in place, inspect it, remove it and trim it, repeatedly, until they are satisfied with its fit. (In most cases, an anaesthetic will not be needed during this step or any of those that follow.)

 

B) Evaluating the shape.

Even though the laboratory or milling machine that has crafted your laminate has crafted it to what it thought was the ideal shape, you and your dentist may decide differently.

Possibly certain edges need to be shortened, squared off or rounded so it looks right. If so, your dentist will complete these changes.

Without question, the goal of this step is to get everything as right about the shape of your laminate as possible. But you don’t have to be too worried if you have some minor reservations about what you notice.

Further refinement can still be made later on after cementation. In fact, at this point, while your veneer just sits loosely on your tooth, trimming it too much might be the bigger concern.

 

Dental Veneer Treatment process

 

 

C) Evaluating the colour.

Your dentist will have chosen a shade of porcelain for your veneer that they expect will result in a close match with your tooth’s neighbouring teeth. But because it’s translucent, its precise colour can be fine-tuned by way of the shade of the cement that’s used to bond it in place.

 

Take note.

It’s important for you to understand that this is your last chance to make an objection about the colour of your new veneer. Once it’s been bonded in place, it can’t be changed.

Step 6: Bonding or Cementing the Veneer

Once you and your dentist have determined that its shape and shade are right, your veneer can be bonded into place.

Your dentist will first wash out the trial paste and clean and prepare your laminate’s internal surface. They’ll also wash off and polish the surface of your tooth, so it’s clean and ready.

1) Etching the tooth. 2) Bonding the veneer in place. 3) Trimming the excess cement.

 

Etching the tooth.

They’ll then etch the surface of your tooth with an acid etching gel (the green in our illustration) for about 15 to 20 seconds. (At a microscopic level, this etching process creates a very rough enamel surface. It’s this texture that the veneer’s cement bonds to.)

(The dental lab will have already prepared the internal aspect of you veneer by etching it with hydrofluoric acid.)

Cementation.

After washing the etching gel off your tooth and drying it, your dentist will apply a layer of clear “bonding agent.”. (This creates the actual bond with the tooth’s etched enamel surface.)

Cement (having the colour previously chosen) is then placed inside the veneer, which is then squished into place.

Once it’s been positioned properly, your dentist will set the cement by way of shining a “curing” light on your tooth.

This light (which has a blue colouration) activates a catalyst in the bonding agent and cement, causing them to set in about a minute.

Step 6: Wrapping things up

The veneer is now securely attached to your tooth.

There will be some excess cement that your dentist will need scrape and floss away. (Actually, they’ll probably have removed most of it before fully cured it. That makes getting it off easier.)

They’ll also need to evaluate your new restoration’s contours and trim and polish them as is needed.

As the last step, your bite will be evaluated so to confirm that it hasn’t been altered by the placement of your veneer.

Step 8: The follow-up appointment

Most dentists will want you to return to their office in about one week.

They’ll want to evaluate how your gums have responded to the presence of your new veneer. And if you have decided that its shape needs to be adjusted some more, they can do that at this appointment too.

Some people may notice that their veneered tooth as some hot and cold sensitivity. If you do, let your dentist know during this visit. While it’s common that it will resolve on its own, they may be able to speed the process up.

 

Unhappy with your Smiles?  Call Vogue Smiles Melbourne on 9629-7664 for Cosmetic Dentistry treatment

 

Categories
Cosmetic Dentistry Dental Veneers

Who is and who isn’t a good candidate for Dental Veneers

Changing the outward appearance of your teeth won’t impact your overall physical health, but it will improve your emotional and mental health. An improved smile can instantly boost your self-esteem, make you feel more confident, and give you pride in your overall appearance. Unfortunately, many people delay improving their smile because they are worried about the cost. Luckily, there may be a cosmetic dentistry treatment option that can allow you to affordably improve your smile.

Veneers are an affordable cosmetic treatment option that can help quickly and effortlessly improve your smile. However, they may not be an option for everyone. If you are thinking about getting veneers to improve your smile, this comprehensive guide will walk you through what they are, how they improve your smile, and who might be a good candidate for them.

What are Veneers?

Think of veneers as a thin, durable mask that can be applied to your natural teeth. Once applied to your teeth, the veneers instantly change the appearance of your teeth. Depending on how they are made, veneers can whiten your teeth, change the shape of your teeth, close large gaps, fix chips or cracks, and cover up the appearance of crooked teeth.

Veneers are made of a very thin shell of porcelain. The porcelain is carefully selected so it matches the look and colour of your teeth.

Each veneer used will be customized by your dentist for your mouth. Dentists will customize everything from the length and width of the veneer to the overall shape, thickness, and colour.

When applying veneers, your dentist will need to do some minor prep work to your natural teeth. Part of the preparation involves removing a small amount of the enamel on your natural teeth. Removing a small amount of enamel allows your dentist to bond the veneer to your teeth in such a way that it has a very natural appearance.

Cosmetic Porcelain Veneers are a great choice for the following kind of patients

  • Where a dramatic cosmetic change is wanted, but you have healthy teeth;
  • You want to improve the alignment of your teeth, but cannot or do not want to undergo teeth straightening procedures (orthodontics);
  • When more than a simple teeth whitening process is needed to improve the  colour of your teeth, veneers can do this effectively, while conserving the health of your teeth or enhancing it;
  • For those who want a tailored smile design , our up to the minute technology allows us to easily assess how to create your ideal smile and plan your perfect smile.

Who are not a good candidate for Dental Veneers

Who is not a Good Candidate for Veneers?

When veneers shouldn’t be used.

There can be situations where certain teeth, or even certain people, are not good candidates for this procedure. Some areas of concern are:

Veneers don’t make the right choice for teeth that need strengthening.

 

a) Teeth that need strengthening.

Teeth that have lost a significant amount of structure due to wear, decay or fracture, and those that have large fillings don’t make good candidates for porcelain laminates.

That’s because veneers do not strengthen teeth, they only improve their appearance. And as mentioned above, if the tooth on which one has been placed is not rigid enough to prevent flexure, it may ultimately crack or break.

In this type of situation, the dental crown placement makes the more appropriate choice.

 

b) Teeth with little enamel.

A porcelain veneer won’t stay in place well unless it’s primarily bonded to tooth enamel. Here’s why.

  • When it’s bonded onto the enamel, the enamel is the more rigid of the two and it tends to absorb most of the forces applied to the tooth.
  • When bonded directly to dentin (the layer underneath the enamel), the laminate is the stiffer object and any forces directed to the tooth tend to become focused in it. This can lead to veneer fracture or debonding.

Some teeth may have little or no enamel remaining on their front surface due to:

1) Tooth wear or trauma.

2) The placement of previous dental restorations.

3) Erosion – Tooth wear caused by exposure to acidic foods and beverages, regurgitation of gastric acid, etc…

If so, they don’t make good candidates. A dental crown would make the more appropriate choice for these teeth.

 

c) Excessive forces are involved.

People who clench and grind their teeth (referred to as bruxism by dentists), or have a bite where their front teeth come together edge-to-edge, don’t make good candidates for porcelain veneers.

The level of forces generated by these conditions can be substantial and can cause laminates to chip, break or debond. One study (Beier 2012) found that a habit of bruxism increased the failure rate of a subject’s veneers by a factor of 8.

As a measure against fracture, construction using a comparatively stronger type of “porcelain” can help (such as aluminium oxide, lithium disilicate, zirconia). The trade-off is that restorations made using these ceramics characteristically have a comparatively less lifelike appearance (similar to our description of dental bonding above).

Who are not a good candidate for Dental Veneers

Who is a Good Candidate for Veneers?

Veneers are a great cosmetic dental treatment option for many people. If you are considering getting veneers, the following are several signs that indicate you may be a good candidate for this type of treatment:

  • Desire to fix severely discoloured or stained teeth – veneers can remove discolouration or stains on your teeth that tend not to respond to traditional teeth whitening treatment
  • Desire to correct stains from extensive tooth decay or old fillings
  • Need to correct minor imperfections on your teeth – veneers can easily fix cracks, misshaped teeth, and chips
  • Desire to correct several cosmetic issues with your teeth at once – veneers can whiten, straighten, and correct the shape of a single tooth or set of teeth all in one procedure
  • Good oral health – patients must have healthy gums and teeth. If your gums and teeth are not healthy, you can undergo treatment to improve their health which may then make you a good candidate for veneers.
  • Sufficient tooth enamel must be present – your natural teeth need to have enough enamel left after the small layer has been removed to create a strong bonding surface for the veneer
  • Straight or moderately straight teeth – veneers can correct slightly crooked or misaligned teeth. However, if your teeth are severely misaligned it could put too much pressure the veneers and cause them to crack.
  • Ability to avoid chewing on your nails, crunching hard candy or food, or gnawing on pens – these bad habits can damage veneers.
  • Do not suffer from nighttime teeth grinding or teeth clenching
  • Practice good oral hygiene on a regular basis – this includes regular brushing and flossing as well as regular appointments with your dentist for routine cleanings

The only way to see if you are a good candidate for veneers is to have us assess your case.

If you are unhappy with your smile and like them  to be improve with Porcelain Veneer, Call Vogue Smiles Melbourne on 9629-7664 for Cosmetic Dentistry treatment

 

Categories
Cosmetic Dentistry Dental Veneers

Lumineers vs Traditional Veneers – Differences, Pros, Cons and Cost

What is Lumineer Veneer?

Lumineers are ultra-thin, (approximately 0.2 mm) custom-made shells that are translucent, making them look very close to the appearance of natural tooth enamel.

Lumineers are dental veneers that are used to improve the appearance of teeth that have cracks, chips, discolourations, and other issues, resulting in much improved and natural-looking smiles.

Lumineers require minimal preparation. The process of getting Lumineers typically takes around two visits. A quicker and easier solution for our patients.

Why People get Lumineers?

If you don’t like dental processes but are still looking to transform your smile, then Lumineers is a great option as these require minimal preparation.

Have chipped, cracked or discoloured teeth. Lumineers can also close gaps between teeth acting as a bridge.

Lumineers provide dental solutions for the following:

  1. Brighten Stained and Discolored Teeth and Restore Chipped Teeth
  2. Eliminate Spacing and Gaps / Align Crooked Teeth
  3. Reshape Small or Misshapen Teeth / Renew Old Dental Work
  4. Perfect Your Hollywood Smile

 

How long will Lumineers last?

Clinical tests have proven that teeth LUMINEERS can last and look great for more than 20 years.
If I have LUMINEERS, can I still eat my favourite foods?
Yes, you can drink and eat what anything you want with confidence because LUMINEERS are applied in the most durable way possible.

What makes Luminers different from other Veneers?

  • LUMINEERS ® BY CERINATE ® are porcelain tooth veneers that offer the painless way to a permanently whiter and perfectly aligned smile.
  • No shaving: Your LUMINEERS dentist applies these contact lens-thin “smile shapers” to teeth with no grinding or shaving of your original teeth, transforming your teeth in a very short time
  • LUMINEERS can even be placed over existing crown or bridgework without having to replace them
  • Contact lens-thin: They really are very thin and are placed over existing teeth without having to remove painful tooth structure (unlike traditional teeth veneers) LUMINEERS is the painless, permanent cosmetic solution for stained, chipped, discoloured or misaligned teeth.

Lumineers vs Traditional Veneers - Differences, Pros, Cons and Cost

Advantages of Lumineers

  • A painless cosmetic procedure, teeth structure and shape remains the same in most cases
  • A smile makeovers that are completed in two dentist appointments
  • A single process that can hide stained teeth or tooth erosion in a single process that does not have to be repeated
  • Ultrathin veneer Works around crowns or bridgework, they replicate the natural appearance of enamel
  • Can help fight penetration of bacteria and microorganisms, and avoid further decay
  • Advanced Lumineers are easily reversible
  • It is proven to last for over 20 years with proper veneer care
  • You’ll need only two dentist appointments

Lumineers vs Traditional Veneers - Differences, Pros, Cons and Cost

Can Lumineers be taken off if I wanted them removed?

Yes, Lumineers are completely reversible because there’s no grinding down of healthy tooth structure, in most cases. Your natural teeth are still intact and strong.

The idea that ultra-thin veneers are “reversible” may help to create public demand for this procedure. But it seems true mostly in theory only. Yes, they can be ground off. But it’s not necessarily a quick process, nor is it likely that your tooth will be returned to its initial pristine condition.

The bond that’s been created during the placement process is very strong and the cement that’s been used typically remains stubbornly attached to the tooth’s surface.

It can be trimmed and buffed off. But that’s not necessarily an easy task, especially when a number of teeth are involved. And it has to be expected that the surface of the tooth’s enamel will be shaved and scuffed up at least somewhat during the process.

In most cases, yes! Your dentist will be able to evaluate your teeth and decide whether orthodontics is necessary. If you do not have a severe problem, Lumineers will reshape your teeth, making them look straighter and more uniform, as well as whiter, something you don’t get with braces.

 

Potential Problems and Cosmetic issues associated with Lumineers?

1) Difficulty in achieving a natural-looking end result

The wafer-thin veneers placed using a no-drilling protocol is often criticized because with some applications they must be made out of comparatively more-opaque porcelain or placed using relatively more-opaque cement, so they are able to adequately mask over the colour of the natural tooth structure that lies underneath.

Why is having opaque veneers a problem?

The whole issue of opaqueness has to do with how natural looking the veneered tooth will end up looking.

Tooth enamel, the part of a tooth that a veneer tries to mimic, is translucent (light is able to pass through it). And a great deal of what gives a tooth its lustrous look has to do with the way light enters into this layer and is then reflected back out.

If a veneer (or veneer/cement combination) doesn’t accurately simulate enamel’s light-handling effect (as in it’s too opaque and keeps light from entering), your tooth’s appearance won’t look quite right. It might look white, but it won’t look perfectly natural.

  • Since it’s so thin, to effectively mask the stained tooth structure that lies underneath the veneer must be made using relatively opaque porcelain.
  • But due to this opaqueness, light will tend to reflect off the veneer’s front surface and not penetrate into it like it does when it strikes enamel
  • Because of this difference in light handling, the veneer won’t look truly lifelike.

2) Potential Tooth bulkiness especially in the gumline area

They may create tooth bulkiness. – No-drill (no tooth preparation) placement can easily result in bulky, over-contoured teeth.

That can make new veneers hard to get used to. It can also make the teeth they’re placed on harder to properly clean.

What are some of the potential problems?
-Plaque retention – Periodontal and tooth decay problems.

A primary concern is the amount of thickness added at the gum line.

The underlying problem.

If you bond a porcelain veneer directly onto the untrimmed surface of a tooth it will change the tooth’s contours, in the sense that there will now be a ledge (sometimes referred to as a “speed bump”) right where the veneer ends

Dentists formally refer to this type of change as affecting the “emergence profile” of a tooth, meaning altering its contours in the region where it exits the gums.

This type of over-contouring can:

  • Make it more difficult to remove dental plaque at the gum line.
  • Tend to interfere with the natural cleansing action created by a person’s lips and cheeks as they slide over a tooth’s surface.

In general, under contouring, a dental restoration typically makes a more benign error than over-contouring. And placing no-drill Lumineers® seems to break this rule of thumb.

Problems that may develop.

When dental plaque cannot be adequately removed, issues associated with tooth decay and gum disease may occur. Of the two, experiencing gum problems is the more common occurrence (persistent gingivitis, periodontal disease).

The consequences of either can be problematic to resolve.

  • Repairing cavities frequently means that the restoration must be replaced. In extreme cases, the decay may be so extensive that just replacing the veneer may no longer be an option for the tooth.
  • Treating gum disease can be successful. But any degree of gum recession that occurs (either triggered to the disease process or its treatment) can easily spoil the appearance of an entire set of veneers.

3) An artificial appearance

Placing restorations that create larger, fuller teeth can easily result in a look that’s artificial. In extreme cases, the term having “horse teeth” may certainly apply. Of course, the degree to which this occurs is the key. And toward keeping it to a minimum case selection is always a primary determinant.

Some people don’t care.

Despite this outcome, the convenience and comfort of being able to take advantage of no-drilling/no-shots placement may be so attractive to some people that this is an easy enough trade-off to choose. Having bigger, larger teeth is not a concern as long as they’re whiter and more perfect.

4) Problems with function

Another area of concern is how the increased size of the veneered teeth will affect the person’s daily activities.

  • Larger teeth can be cumbersome, affect a person’s speech, or even the way they bite into things.
  • Fuller teeth can also change the way a person’s lips are supported by or rest over their teeth. In extreme cases it may be difficult for the person to close their lips together.

Fortunately, over time people tend to adapt to these types of difficulties. It’s just a matter of how extreme the change has been.

4) Cost

The total amount of treatment time that a dentist must set aside for a no-drill Lumineers® case is less than that needed for conventional veneer placement. (That’s because there’s less work to do during the 1st visit.)

But this cost-savings is at least in part offset by the fact that the dental laboratory bill for the Lumineers® will likely be greater.

 

LUMINEERS VENEER versus TRADITIONAL PORCELAIN VENEER IN MELBOURNE

How Traditional Dental Veneers differ?

 

Because they are thicker, conventional porcelain veneers can be made out of comparatively more-translucent porcelain, yet they are still able to mask dark tooth structure that lies underneath them.

That means the light will be able to enter into and reflect back out of them in a fashion that truly mimics the lustrous look of a natural tooth.

Also, a thicker laminate generally offers the dental technician more opportunity to incorporate characterization and shading qualities into the veneer itself by way of using different shades of porcelain in its fabrication

A lot of people simply don’t appreciate this difference.

We do have to admit that when it comes to the issue of obtaining a precisely lifelike result, many people just don’t seem to care.

The ease and pain-free advantage that no-drilling/no-shots technique offers simply outweighs the disadvantage of a less than the perfectly natural-looking outcome.

 

Feeling insecured and unhappy with your Smile? To learn more about Lumineers versus Traditional Porcelain Dental Veneer, Call Vogue Smiles Melbourne on 9629-7664 for Cosmetic Dentistry treatment

 

Categories
Teeth Straightening

Invisalign® FAQs | Types, How does it work & Dental Specials

Invisalign is a breakthrough technology that lets you have the smile you’ve always wanted, without the hassle of braces.

By using a series of clear, removable aligners, Invisalign straightens your teeth with results you’ll notice sooner than you think. An Invisalign treatment can take anywhere from 2 – 24 months.

The course of treatment involves changing aligners approximately every two weeks, with each aligner progressively moving your teeth into a more aesthetically pleasing position, until you have a more beautiful smile. The total number of clear aligners is specific to your smile and determined by our dentists.

If you’re ready for a smile that transforms your appearance, Invisalign may be your perfect answer. It is simply a great way to transform your smile without interfering at all in your day-to-day life or busy schedule.

Invisalign® FAQs | Types, How does it work & Dental Specials

What types of Invisalign Treatment are there?

 

There is now a range of Invisalign treatments that cater to different conditions and type of mouths. The type of aligner that may be advised to you will be dependent upon the complexity of your treatment

Invisalign i7

This type of aligner is used in cases where there are minor abnormalities for overcrowding or spacing issues. It can also be used for correction of minor relapse cases. This is particularly good for small aesthetic improvements or where partial treatment is required. You may need up to 7 aligners in total to complete the treatment. Treatment is often limited to the front 8 teeth.

Invisalign Lite

This type of aligner is restricted to a Class 1 case. This is where the bite is considered normal and the upper front teeth overlap the lower front teeth by a small amount. You may need up to 14 aligners in total to complete the treatment.

Invisalign Full

These aligners can be used for most dentition types. The number of aligners will be dependent upon your treatment plan and severity of your condition. Most design features can be used with this type of aligner and it has the greatest degree of flexibility in terms of treatments possible.

Invisalign Teen

Invisalign treatment has multiple uses and is not just for adults. The number of aligners will be dependent upon the complexity of your treatment plan.

Summary of main features:

Invisalign Traditional Braces
Price similar similar
Comfort Very comfortable Some irritation
Visual Nearly Invisible More noticeable (although still tooth coloured)
Treatment Reliance Reliance on your consistency of wear Not reliant on your consistency of wear
Treatment Time Longer 3-24 months Shorter 3-9 months
Appointments More time between appointment Less time between appointment

 

Types of Teeth Preparation involves with Invisalign Treatment

 

In order to maximize the Invisalign treatment for an optimal outcome, we may need to prepare the teeth. The prepared teeth help the aligners to move the teeth as desired into the correct positions.

During your Treatment Planning, we will use special innovations in the software digital technology to plan any preliminary treatment that may be required beforehand. This not only outlines the preparation needed for the teeth but also we will be able to incorporate any specific enhancement features into the design of the aligners as well.

IPR – Inter Promixal Reduction

This preliminary preparation can consist of minimal preparation (maximum 0.5mm) between the teeth to create space for correct alignment and position of teeth. This allows the teeth to fit correctly together and appear straight.

Attachments

This type of teeth preparation involves placing tiny attachments called Optimised Attachments on the outside of your teeth. These are special features unique to Invisalign.

The Optimized Attachments can have “active” surfaces and “inactive” surfaces used to facilitate a specific type of movement. The attachments are small miniature composite pieces that are bonded to the outside of certain teeth. They are tooth coloured and not visible. Once treatment is completed the attachments are removed.

Your dentist will discuss any preparation that needs to be done to your teeth before any treatment commences.

Tooth Movement during Invisalign Treatment

Special activators integrated into the treatment trays apply small forces to the teeth. They are applied gradually over a period of time allowing the teeth to move consecutively and in an orderly fashion.

You will be given numbered aligners that are to be worn sequentially. They move the teeth very slowly so you will be able to see the gradual movement over time as your teeth are correctly aligned.

The treatment components allow the dentist to have more control so that you will achieve an optimal end result. Most common teeth alignment and positional issues can be treated with Invisalign. There is a spectrum of possible treatment ranging from simple movements to more complex treatment plans. Your dentist will advise where you fall in this spectrum and help advise as to the best type of aligners for you.

 

Wearing of Invisalign Aligners

Do I Need to Wear my Aligners All the Time?

In order for the treatment to be effective and occur in a timely fashion, you do need to wear them in your mouth most of the time. We recommend at least for 20-22 hours. However, if you have a special event or perhaps you play a wind instrument, on the advice of your dentist you may be able to take it out for that specific occasion or time. If this has to happen your dentist will advise you how to manage and reactivate your treatment.

How long Do I have to wear the Aligners?

You will be given a sequence of aligners to wear. Usually, you will wear each aligner for approximately 2 weeks before changing to the next aligner in the sequence.

You will need a checkup once every 4-6 weeks to make sure everything is going according to plan.

Will I be able to eat my food with it?

Ideally, you should take out all aligners for eating and drinking – unless you are simply sipping cool water. For best results, you must wear your aligners for the required period. Eating with your aligners could damage them.

 

 

Invisalign Frequently Asked Questions

Will it work for me?

Not only is Invisalign versatile, helping to correct a broad range of dental and orthodontic issues, but it really works. There are over half a million smiles to back that up, however, a confident smile isn’t the only benefit of correcting your dental issues with custom made Invisalign aligners, your health can be positively impacted as well.

Invisalign can correct Overly crowded teeth, widely spaced teeth, crossbite, overbite and underbites.

Will it fit my life?

With Invisalign, all you need to adjust to is your new, beautiful smile!

Reasons why my teeth are Crowded?

  • The jaw bone may be too small so cannot accommodate all the teeth
  • The teeth may be too big so do not fit the “normal” size jaw bone
  • There may be an imbalance between muscles of tongue, cheeks and lips

If you have crooked teeth because there doesn’t seem to be enough space in your mouth, then the dentist will have to create the necessary space. There are several ways to do this, however, the most common way is either to extract some teeth, redesign the arch form or to use a technique called IPR (Inter Proximal Reduction).

In most Invisalign cases we may re-design the arch form or use IPR. The technique of choice will ultimately be dependent on the results of your Orthodontic Examination and the complexity of your specific requirements.

Do I need to expand my arch with Invisalign?

One way of fixing crowded teeth is expanding the bone. But this can involve complex lengthy treatment. However, we can create the illusion of an expanded bone by flaring out the arch form of the teeth to accommodate the width of all the teeth and align them to appear straight.

However, this treatment is very case-specific and if correct teeth width versus arch length is not analyzed the teeth could look flared. Your dentist will be able to advise for your specific case during the assessment.

Should I sleep with my Invisalign Aligners in my mouth? I

Yes, you do need to keep them in overnight. However, they are quite stable and highly retentive. Also, many patients find that they are very comfortable.

If I need both upper and lower teeth, will I be able to talk with Invisalign aligners in my mouth?

You will be surprised how easily most people adapt to wearing the Invisalign aligners. You will be able to speak as you normally do with them inside your mouth. Most people even forget that they are wearing them.

Do the Aligners hurt?

The treatment is not painful. However, when you first wear the aligners you may feel a slight pressure on your teeth. But this is a good sign as it means that the active components are working to move and correct your teeth.

Will the aligners affect my speech?

Most patients do not have any speech issues. However, some may experience a temporary effect of a slight lisp for a few days. But there are usually no lasting effects.

Would Invisalign correct closing the spaces between my teeth?

Invisalign is an excellent option if you have spaces or gaps between your teeth.

They can be caused by:

  • Gaps because of lost teeth
  • Small spaces between teeth naturally
  • Spaces created by the movement of teeth

The Invisalign aligner simply moves your teeth together closing the gaps. Alternatively, the aligner can be used to create the ideal width of space to allow for an artificial tooth to be placed in the space. Often this technique is used when Implants or bridgework forms part of the treatment plan.

What if I feel I don’t have enough space in my mouth?

Many people may be dissatisfied with the cosmetics of their smile due to the crowding of teeth which consequently leads to crooked teeth. It may appear that there is not enough space in your mouth for all your teeth.

How do I choose between Traditional Braces and Invisalign? How will I know which one is right for me?

There are several factors that can help you decide which type of teeth straightening system is correct for you. A detailed assessment with your dentist will also highlight the best way forward for you.

What if I am not Compliant in wearing my aligners all the time?

Another factor to consider is compliance for wear. If you feel that you are not the type of person to wear the aligners as requested then it may be better that you opt for a bracket and wire system where the total control of the treatment is placed with your dentist. On the other hand, many people who have a time constraint find that the limited number of dental appointments with the aligner system may work better for them. So one choice that governs which system is appropriate for you is how well you will comply with the treatment.

Is it really Invisible?

Invisalign braces are less noticeable than any bracket and wire system (although many are tooth coloured). However, the treatment may take slightly longer to complete.

What do I need to know about Post-Invisalign Treatment Care?

Regardless of whether you have had any treatment, we recommend regular checkups to make sure your mouth is as healthy as it can be. However, it becomes even more imperative to maintain your routine examination appointments after you have had some dental work done. This allows the dentist to make sure that your treatment is in good condition, thus helping you to maintain a healthy mouth.

What are the retention options do I have?

After you have had your treatment completed you will need to be fitted with a retainer. These help to keep the newly aligned teeth secure in their new positions. The dentist will discuss various options with you.

They include:

  • Conventional Retainer
  • Positional Retainer
  • Vivera Retainer
  • Fixed Retainer

How about Oral Hygiene?

Due to the very nature of these aligners, you are still able to follow your home cleaning regime as advised by your dentist or hygienist throughout the treatment.

An advantage of straightening your teeth is that your teeth end up in a position that aids your ability to clean them properly. However, the technique you will now follow post-treatment to clean your teeth will need to be slightly adjusted. Often due to the placement of a fixed retainer, you will need to use appropriately sized interdental brushes eg. TePe brushes to clean between your teeth. Hence, regular flossing will not be as efficient on the teeth fixed by the retainer.

What if I need Dental work during the Invisalign Treatment?

After treatment most dentistry occurs in the usual manner. Your Invisalign or any orthodontic treatment will not prevent the dentist from carrying out most dental treatments as and when they are required. The hygienist is also skilled in gum treatments without being inhibited by your teeth or any fixed retainers placed on your teeth.

Going forward, after any treatment, your dentist will be able to advise your of your specific customized post-treatment care program.

Lenght of Treatment

Due to the very slow gradual movement of the teeth, Invisalign treatment may take slightly longer to complete. Treatment can range anything from 3- 24 months. Most bracket and wire systems are often completed within 3 – 9 months.

Number of appointments with Invisalign

Most short-term adult orthodontic bracket and wire treatments require 4-6 weekly appointments. These appointments are to make any necessary adjustments to allow the teeth to move gradually into the correct alignment. On the other hand Invisalign treatments often require fewer appointments since multiple aligning trays are given to the patient at one visit. You are then able to change the trays yourself. This change of trays applies the necessary forces to move the teeth gradually into the correct alignment. Hence, if you are unable to visit the dentist regularly then Invisalign would be a great treatment choice.

Is it Comfortable?

Invisalign aligners are very comfortable to wear since there are no brackets or wires irritating the gums, lips and mouth.

t will be able to advise as to the most appropriate choices for you.

Prevention of Relapse 

After your treatment has been completed your dentist will place a fixed retainer in your mouth on the inside surfaces of the front 4-6 teeth of the arch that has been treated.

On most patients, we also create a removable retainer that looks similar to the clear aligner but is made of a stronger material. This specific retainer is called Vivera and is constructed using a special technology that helps the retainer to be more rigid. Most traditional retainers are prone to relapse of treatment if they are not kept in the correct condition.

Vivera Retainers

This is a removable retainer designed by Invisalign that is usually worn at night to prevent any relapse of your treatment. It can be used after any type of teeth straightening treatment and is not restrictive to Invisalign and is used for most orthodontic cases. It is made from a specially patented material which is proven to be 30% stronger than most other leading clear retainer types.

Often Vivera is used as additional support for a fixed retainer such as a Bonded Lingual wire (wire bonded to front teeth on the inside). This forms a belt and braces approach to prevention of any relapse and ensuring the longevity of the treatment.

How long after the treatment do I have to keep wearing my retainers?

As an adult, you will need to wear your retainers inevitably. This is to prevent any relapse of treatment. The removable retainer is often worn at night only.

 

How much does Invisalign Treatment Cost in Melbourne? 

 

We understand that the fee you pay for any treatment is an important consideration. Most people are looking for a cost-effective solution to their situation. We also understand that the ultimate treatment of choice needs to be long-lasting with minimal post-treatment problems.

Your smile is an important aspect of your self-confidence and self-esteem. It affects every aspect of your life. Hence, we know that any treatment is not only about the procedure – it represents much more.

Invisalign is an excellent choice of treatment for most adults who are looking to align their teeth to enhance their smile. Your assessment with us will accentuate if this is the correct treatment for you. In order for a treatment solution to be long-lasting with minimal after treatment issues its needs to fulfil all the criteria for any specific condition. We will help advise if Invisalign is correct for you.

The fee for the Invisalign treatment usually ranges according to the types of Invisalign use according to your specific requirements. The table below gives a rough indication.

Invisalign Fees

 

The fee includes all of the following:

  • All Consultations
  • All photographs, impressions and records
  • Any preliminary preparation for your teeth
  • Digital 3D computer simulation ClinCheck for Treatment Planning
  • All the customised Aligners for your entire treatment
  • Any additional appointments for checkups and alterations
  • Fixed retainers
  • Vivera Retainers
  • Teeth Whitening
  • Minimal bite adjustments
  • Micro-enhancements
  • Review Appointment

0% Finance Available

Please note that we offer various payment plans and flexible finance options (including 0% interest) to make this treatment more accommodating for you.

If you want to straighten Crooked teeth and bad bite with Invisalign,  Call Vogue Smiles Melbourne on 9629-7664 for Invisalign treatment

 

 

Categories
Cosmetic Dentistry Dental Bonding and Composite Veneers Dental Veneers

Instant Veneers Melbourne

A beautiful smile can light up one’s whole face and is one of the first things that others will notice about a person. Any imperfection about the smile, no matter how small or how seemingly inconspicuous it may be, can have a significantly negative impact on the overall aesthetics of the smile – and can actually make a person look less attractive in an instant.

There are a number of cosmetic dentistry treatment options that can be used to improve the appearance of a smile, depending on which aspect will need to be addressed. These treatments can even be used to improve not only the aesthetics of one’s smile but also to improve the function of the teeth and overall dental health.

What are instant veneers and what can they treat. In this article, we discuss the options.

 

instant veneers - dental bonding -composite Veneers -Vogue Smiles Melbourne -Cosmetic Dentist Melbourne

Problems Addressed by Composite Instant Veneers

Decayed or Damaged Teeth – Teeth that have been damaged by tooth decay can be improved with the help of composite veneers. The veneers offer a cost-effective solution to the improvement of both the aesthetic and functional aspects of damaged teeth.

Crooked Teeth – Composite veneers can improve the appearance of crooked or improperly aligned teeth so that one’s smile looks more natural and more beautifully aligned. The veneers offer faster teeth alignment results compared to orthodontic treatment. Unsightly spaces between teeth can also be remedied with composite veneers.

Misshapen Teeth – Irregularly shaped or misshapen teeth can be improved with composite veneers, to bring about a better-looking smile. Discoloured or Stained Teeth – Stains and discolourations on the surface of teeth, especially those that are resistant to teeth whitening procedures, can be addressed with composite veneers. The custom-made shells will be placed on top of the affected teeth to improve the overall appearance.

 

instant veneers - dental bonding -composite Veneers -Vogue Smiles Melbourne -Cosmetic Dentist Melbourne

What are Instant Veneers?

Put simply instant veneers are the same as dental bonding. This is a modern dental technique using ultra-modern technology where your dentist will apply a small amount of tooth-coloured ‘composite’ material to your deficient tooth. This material is bonded to the surface of your tooth with a special etching process and then the composite is set or ‘cured’ with high powered light.

Composite veneers provide effective and reliable solutions to some of the most pressing cosmetic dentistry problems that need to be addressed, in the quest to have a vastly improved smile.

Also called direct veneers, composite veneers are custom-made shells that are made of a composite material; these shells are used to improve the appearance of natural teeth that have damage, discolourations, stains, unsightly gaps, or are improperly aligned. Unlike porcelain veneers, composite veneers can be created chair-side by the dentist, so that the aesthetic improvements on the teeth can be completed in a single dental visit; porcelain veneers are created in a laboratory, and will usually need two to three dental appointments to be completed.

 

Advantages of Dental Bonding or Instant Veneers

 

The advantages are simple and easy to understand and include:

  • It’s a quick process that can often be done in an hour for simple corrections. Composite veneers are created chair-side by the dentist, so the treatment can be finished in a single dental visit. There is no need to wait for the veneers to be finished by a laboratory, as in the case of a porcelain veneer treatment – which takes two to three visits to be completed.
  • One appointment required, regular veneers require at least 2
  • Often no dental injection is required
  • Instant results
  • Confidence boosting as troublesome teeth can be quickly treated
  • The composite veneers procedure requires very little or no reduction (through drilling) of the teeth structure, making it minimally invasive; the minimally invasive procedure also ensures that the healthy tooth structure is preserved.
  • The composite veneer treatment is more cost-effective compared to the use of porcelain veneers; this is because there is no need for invasive drilling procedures, and also because of the fewer visits to the dentist required.

 

What are the differences between Dental Composite Veneers versus Porcelain Veneers?

Composite bonding (also sometimes called “direct veneers” or “plastic veneers”) is a tooth-coloured plastic resin material. Bonding can usually be placed in one visit and is used many times to repair a smaller chip in a tooth or to make aesthetic improvements in more than one tooth. Bonding usually requires little to no tooth reduction or anaesthesia. Because they are made out of porcelain in a lab, porcelain veneers are usually more aesthetic in terms of the spectrum of colours, realism and translucency. Porcelain veneers are also more of a long-term solution than bonding, as they do not stain, discolour, and are stronger than bonding. Porcelain veneers usually require only a couple of office visits – the first visit to prepare the teeth and the second to seat the veneers.

Major flaws in teeth can’t be treated with bonding or instant veneers however small minor dental imperfections are normally pretty easy to treat this way.

 

 

 

instant veneers - dental bonding -composite Veneers -Vogue Smiles Melbourne -Cosmetic Dentist Melbourne

If you are unhappy with your Smiles and thinking of having Instant Veneers, Call Vogue Smiles Melbourne 9629-7664 for your Cosmetic Dentistry treatment

 

Categories
Cosmetic Dentistry Teeth Straightening

How to Instantly straighten Crooked teeth without Braces for Adults

INSTANT ORTHODONTICS IN MELBOURNE CBD

 

A beautiful smile and straight teeth can make a huge difference in your appearance and self-confidence, but traditional orthodontic methods can be both time-consuming and uncomfortable. Moreover, not everyone suffers from the sort of bite problems that truly call for braces or similar treatments. In many instances, patients simply want their most visible teeth to appear to be in uniform alignment.

 

Few of us were born with a perfect Hollywood smile. However, that doesn’t mean you can’t attain your dream smile now. At Vogue Smiles Melbourne, we proudly offer beautiful porcelain veneers as part of our expansive menu of cosmetic dentistry services. Veneers are an ideal solution for patients who want to instantly and permanently correct teeth that are crooked, gapped, misshapen or discolored. Veneers require as little as two office visits in order to transform your unsightly teeth into an attractive, balanced smile that you are proud to show off. We are committed to delivering the highest standard of care when it comes to cosmetic dentistry. We believe that every patient deserves to have a confident smile, regardless of his or her specific aesthetic flaws.

 

In such cases, porcelain veneers may be able to help. Also known as instant orthodontics in these instances, veneers allow someone to obtain a brand new smile in just one or two visits. Rather than undergoing a lengthy orthodontic process, consider the benefits of permanently straightening your smile with porcelain veneers.

 

Many patients are not aware that there is an alternate to traditional orthodontic treatment. Our patients are often relieved to learn that we can improve the appearance of crooked teeth, correct misshapen teeth, or fill in gaps between teeth, almost instantly. For our patients in Melbourne, porcelain veneers are applied to eliminate the appearance of crooked or misshapen teeth in an average of just 2-3  dental appointments

 

How do Porcelain Veneer works in Instantly straightening Crooked teeth

 

Veneers are thin layers of porcelain that are crafted to match the color, size, and shape of your teeth, but with slight improvements. They are permanently cemented over teeth, covering imperfections beneath while creating a new visage over the front. Because of porcelain’s near-identical appearance to natural enamel, veneers effectively create a brand new, beautiful smile without sacrificing the underlying teeth. Whether you use veneers to cover one tooth or multiple teeth, they are created to complement and improve your specific smile.

 

Because veneers cover teeth, they can be used to adjust the width and edge of each tooth. In this way, veneers can alter the apparent alignment of teeth, creating an overall image of uniformity and alignment. Similarly, they can be used to fill gaps between teeth or create a more evenly spaced smile. Once veneers are placed, the changes are durable and long-lasting.

 

Instantly straighten Crooked teeth and bad bite without Braces or Invisalign with Porcelain Veneer

The Benefits of “Instant” Orthodontics

 

When you use porcelain veneers to achieve a straighter smile, you gain several advantages over traditional orthodontic methods, including:

  • Quick results: Braces and similar procedures can take months, if not years, for the final result. Rather than gradually shifting teeth into place, veneers immediately produce a new smile altogether. In just two dental visits, we can take impressions of your teeth, prepare them for veneers, and ultimately place your veneers once they are ready. Both visits can typically be scheduled within a couple of weeks.

 

  • No metal braces: Orthodontic hardware can be a hassle throughout the treatment process.

 

  • Additional cosmetic benefits: Braces will only improve straightness, whereas porcelain veneers improve virtually every aesthetic quality. Stains, cracks, and undersized teeth can be conveniently hidden while teeth are also straightened, and the quality of porcelain ensures that future imperfections can be more easily avoided.

 

Instantly straighten Crooked teeth and bad bite without Braces or Invisalign with Porcelain Veneer

Candidates for Instant Orthodontics

 

While porcelain veneers are often an appealing option, patients must first be sure that they are well suited for the procedure. First and foremost, teeth and gums must be in relatively good condition – any instance of decay or disease must first be dealt with via restorative dentistry. To ensure the longevity of veneers, patients with bruxism (habitual teeth grinding) may also want to speak with their dentist about protecting their veneers from chips or cracks.

 

In regard to orthodontics, it should be noted that porcelain veneers are a purely cosmetic procedure. They will not fix severe alignment issues that create bite problems or threaten one’s oral health. In such cases, and in cases where teeth are impacted, traditional orthodontics are in fact needed to create proper space within the mouth. Nevertheless, for those who simply want to achieve straighter looking teeth for aesthetic purposes, instant orthodontics may very well be an excellent alternative.

 

Porcelain Veneers as an Orthodontic Treatment

 

Not all porcelain veneers are created equally. At Vogue Smiles Melbourne, we craft our veneers from the finest-grade dental porcelain available, customizing them so that they complement surrounding teeth perfectly in terms of size, shape, colour, and even texture. Your porcelain veneers will be durable, natural-looking, and strong. With proper care, they will remain bonded to the surfaces of your teeth for years, concealing such cosmetic flaws as chips, cracks, and discolouration.

 

Although they are known primarily as a cosmetic treatment, porcelain veneers can also serve a restorative purpose. By lengthening teeth that are disproportionately short and filling in small gaps that separate teeth, porcelain veneers not only improve the appearance of the smile, but also help to improve the orientation of the teeth and the strength of the bite. The teeth in the upper jaw will meet the teeth in the lower jaw properly after treatment, while the teeth that had been separated by gaps will no longer be inclined to shift out of their optimal positions toward the empty space. The teeth to which the veneers are attached will also be stronger, as the veneers will act as reinforcements.

 

Not all patients will be good candidates for instant orthodontics with porcelain veneers. More severe orthodontic issues will require more conventional treatment methods. However, some patients may be able to begin treatment with these more conventional methods and then complete their treatment with porcelain veneers, achieving the full cosmetic benefits that porcelain veneers have to offer.

 

Many patients choose to combine instant orthodontics with other cosmetic treatments such as teeth whitening or dental crowns as part of a comprehensive smile makeover plan.

Frequently Asked Questions

Are veneers permanent?

Yes, they are. During the veneers process, we remove a layer of enamel to ensure that the veneers sit flush with your other teeth. Because of this step, the veneers process is irreversible. If you’re looking for permanent, transformative results, dental veneers are the way to go.

Are veneers stain-resistant?

Part of the benefits of dental veneers is that they are made from stain-resistant porcelain material. While proper dental hygiene such as brushing and flossing is still important, the porcelain shells are not as susceptible to certain foods, drinks, and medications as natural teeth are.

Cost of Porcelain Veneers

The cost of porcelain veneers will vary from patient to patient and depends on such factors as how many veneers you need and how complex your individual case is. Costs will also rise if you need additional treatments along with your veneers.

 

When you visit us for a smile consultation, we’ll give you an accurate cost breakdown based on how many veneers you’re getting and more.

 

We understand that porcelain veneers can be a large upfront cost, so we offer dental financing plans for patients who would prefer to spread out the cost. Ask us about which plans we take during your consultation, and our patient coordinator will be happy to assist you in finding the right financing plan for your needs.

 

Learn More about Instant Orthodontics Read from our Blog

 

If you want to Instantly straighten Crooked teeth and bad bite without Braces or Invisalign with Porcelain Veneer, Call Vogue Smiles Melbourne on 9629-7664 for Cosmetic Dentistry treatment